Futaba 10J F4109 Fiche De Données

① Call the menu screen from the 

home screen by pressing the + 

key  for 1 second.

＋

② Select 

    from the menu with the 

Jog key.

③ Open the setting screen by 

pressing the Jog key.

（1 second）

＋

－

or

① Select the "MIX" item 

and then select the on 

or off by pressing the + 

key or – key.

● When you do not use a function, set to the 

"INH" side. 

＋

－

or

② Select the "SW" item 

and  then  select  the 

switch by pressing the 

+ key or – key.

Range：SwA ～ SwH、Default：SwC

③ Select the "POSI" by pressing the 

+ key or – key at the ON direction 

selection item.

Range：

● 2P SW：NULL, UP, DOWN

● 3P  SW：NULL, UP, UP&D, UP&C, 

＋

－

or

④ Select the "RATE" item and 

then  adjust  the  idle  down 

rate by pressing the + key or 

Range：0 ～ 40%

Default：0%

● When you want to return the set value to the initial 

value, press the + key and – key simultaneously.

This function is linked to the air brake switch 

and gear switch and lowers the engine idle. It is 

used when engine idle is set high to prevent the 

engine from stalling during flight and you want to 

lower engine idle when landing.

●The amount engine idle is lowered can be set.

●At idling down operation, the stop lever adjusts the 

idle down amount.

●Function operation can be selected from among 

switches A 〜 H. The switch direction can also be 

selected.

● The idle down amount is usually 10% 〜 20%. Hold down the aircraft and set the throttle switch to the maximum 

slow position while the engine is running and adjust the idle drop amount while turning the switch on and off.

● When not using this Function 

select INH. The display of On/

Off is shown when active and 

assigned to a switch. 

● Select  the  setting  item 

with the Jog key.

● Sets the ON/OFF direction of the selected switch.

○ 2P SW：NULL, UP, DOWN

○ 3P SW：NULL, UP, UP&D, UP&C, CNTR, C&DN, DOWN