Laserliner 082.030A Manuel D’Utilisation

Read the operating instructions and the enclosed
brochure „Guarantee and additional notices“
completely. Follow the instructions they contain.
Safely keep these documents for future reference.

• The measuring instrument must not be used in closed ovens.

• Thoroughly clean the sensor before and after use.

• The measuring instrument is not water tight. Only dip the

measuring probe into the material up to approx. 10 mm
below the casing.

• Only hold the thermometer by the casing. Do not touch the

test probe, it can become very hot during the measuring
procedure.

• „- - °C“ will be displayed if the measured temperature is

outside the measuring range.

• Do not use the measuring probe with an external voltage.

Exercise extreme caution when working with voltages higher
than 24V AC/60 V DC. Touching the electrical conductors at
such voltages poses a risk of life-threatening electric shocks.

• The measuring accuracy may be affected when working close

to high voltages or high electromagnetic alternating Ö elds.

• The device must only be used in accordance with its intended

purpose and within the scope of the speciÖ cations.

• Measuring instruments and accessories are not toys. Keep

out of reach of children.

• Always replace the protective cover on the measuring probe

when not in use.

Safety information

Function/application:
The digital thermometer features an integrated NTC sensor
which is used to measure temperature and temperature diffe-
rences. The thermometer is used to measure the temperature
of bulk, liquid or soft materials in all standard household,
gastronomy, trade, craft and industrial applications.