Insys GSM 4.2 Compact 11-02-01-03-04.002 Manuel D’Utilisation
Codes de produits
11-02-01-03-04.002
Introduction
INSYS GSM 4.2
INSYS GSM 4.2 compact
8
Sep-06
Emphasis
Representation
Meaning
"Basic settings"
Software HSComm GUI texts, e.g. button, entry
field, tab description
field, tab description
AT
AT command
<expression>
Entering of the parameter for an AT command
[expression]
Entering of the optional parameter for an AT com-
mand
mand
OK
Response of an AT command
Notes for entering AT commands
AT command descriptions are displayed in two columns. The function is described on the
left side; the AT commands and responses are described on the right side.
All AT commands start with the letters AT and end with a “Return” (Carriage Return -
CR). AT commands can be entered in capital or small letters. The command is processed
after the modem received a CR input.
In the following, the used syntax is described, using two examples:
AT+CPIN=<n>
Entering the PIN 1234:
AT command descriptions are displayed in two columns. The function is described on the
left side; the AT commands and responses are described on the right side.
All AT commands start with the letters AT and end with a “Return” (Carriage Return -
CR). AT commands can be entered in capital or small letters. The command is processed
after the modem received a CR input.
In the following, the used syntax is described, using two examples:
AT+CPIN=<n>
Entering the PIN 1234:
at+cpin=1234
OK
ATD<ip>:<port>+CPIN=<n>
Dialing the IP address 192.168.0.1 and
the IP port 1234
Dialing the IP address 192.168.0.1 and
the IP port 1234
ATD192.168.0.1:1234
OK
Additional documentation
Please find a complete overview of all AT commands in the document: "AT Command Set
for INSYS GSM 4.2".
The complete reference for the standard AT commands is available on request.
Please find a complete overview of all AT commands in the document: "AT Command Set
for INSYS GSM 4.2".
The complete reference for the standard AT commands is available on request.
Software HSComm
The software HSComm is available for the configuration of the INSYS GSM. The following
system requirements are necessary for HSComm:
The software HSComm is available for the configuration of the INSYS GSM. The following
system requirements are necessary for HSComm:
- Windows 2000
- Windows XP
- Windows XP
The configuration software is available for download at the following address:
http://www.insys-tec.de
http://www.insys-tec.de
Technical support
Call technical support at:
Call technical support at:
¾
E-mail: insys@insys-tec.de
¾
0941/560061