H Tronic 230 V / ACCharger C5ForNiCd, NiMH, Li-ion, LiPolymer, SLA, Lead-acid, Lead acid membraneRechargeable batteriesM 1242465 Manuel D’Utilisation
Codes de produits
1242465
• Ensure that the entire product’s insulation is neither damaged nor destroyed. Never open or dismantle it!
• Inspect the product for any damage prior to each use!
Should you find any damage, do not operate the unit but take it to a specialist workshop.
• When the unit is not in use, disconnect it from the mains supply and the battery.
• Never touch the unit through its ventilation slits or other openings in the unit with sharp objects (e.g.
ball point pen, sewing and knitting needles, paper clips etc.). There is a danger of lethal electric
shock and damage to the unit!
shock and damage to the unit!
6. Cleaning
In order to clean the casing use a soft cloth and some mild detergent. Strong solvents such as thinners or
petrol as well as scouring agents must not be used, as they react with the surface. Dispose of cleaning
cloths and surplus cleaning agents in an environmentally friendly manner. For safety reasons, the mains
plug must always be pulled out before cleaning! Prevent cleaning agents from getting inside the unit!
Electromagnetic compatibility
This item has been tested according to EC Directive 89/336/EEC (EMC from 09.11.1992, electromagnetic
compatibility) and meets the legal requirements.
Overview of the most important specifications:
•
Battery types
NiCd, NiMH, Pb, Li-ion, Li-polymer
•
Charging/discharge current(min)
50 mA
•
Charging/discharge current(max)
5000 mA
•
Cell number (NiCd, NiMH)
1 - 20 cells
•
Cell number (Pb)
1 - 14 cells
•
Cell number (Li-ion, Li-polymer)
1 - 8 cells
•
Battery capacity
100 mAh - 100 Ah
•
Operating voltage
230 V/50 Hz
•
Power consumption
max. 80 VA
•
Maximum output voltage:
38V;
•
Maximum charging rate:
70W;
•
Maximum discharge rate:
30W;
Overview of the most significant features:
•
Simple and intuitive menu control using a joystick
•
Six general service programmes:
o
Charging;
o
Discharging;
o
Discharging-Charging;
o
Charging-Discharging-C;
o
Cycle;
o
Forming;
•
A special charging programme that enables the charging voltage and charge current to be
set by hand (manual charging).
set by hand (manual charging).
•
Integrated data logger for recording charge/discharge curve progress without a PC
•
Fine settings for parameters such as:
o
Delta peak
o
Charging cut-off voltage
o
Discharging cut-off voltage
o
Switch-off current
o
Maximum battery temperature
o
Etc.
•
Temperature control of the battery with a temperature sensor
•
USB port for:
o
Firmware update;
o
Data logger flash readout;
o
Data transfer to PC;
o
Remote control of the unit, with the possibility to develop one’s own
charge/discharge programmes, independent of unit programmes.
charge/discharge programmes, independent of unit programmes.
•
UART-TTL port for remote control of the unit through a microcontroller
•
Display of various set and determined parameters during the service process, as well as
the resistance of the current-chain ‘battery+charging cable’ and charge/discharge
statistics.
the resistance of the current-chain ‘battery+charging cable’ and charge/discharge
statistics.
•
Temperature controlled cooling fan