Microchip Technology PICDEM 2 Plus DM163022-1 DM163022-1 Manuel D’Utilisation
Codes de produits
DM163022-1
PICDEM™ 2 Plus User’s Guide
DS51275D-page 12
© 2007 Microchip Technology Inc.
2.2
PICDEM™ 2 PLUS USED WITH AN IN-CIRCUIT EMULATOR
OR IN-CIRCUIT DEBUGGER
OR IN-CIRCUIT DEBUGGER
To use PICDEM 2 Plus with an In-Circuit Emulator (ICE) or In-Circuit Debugger (ICD),
refer to the tool’s user guide for instructions to learn how to:
• Power-up and configure the ICE/ICD
• Connect to target boards (such as in Figure 2-1)
refer to the tool’s user guide for instructions to learn how to:
• Power-up and configure the ICE/ICD
• Connect to target boards (such as in Figure 2-1)
FIGURE 2-1:
PICDEM™ 2 PLUS CONNECTED TO MPLAB
®
ICD 2 USING USB
Configure the PICDEM 2 Plus for the desired oscillator as described in Table 2-1. Refer
to the ICE/ICD user’s guide for any oscillator configuration requirements.
to the ICE/ICD user’s guide for any oscillator configuration requirements.
TABLE 2-1:
OSCILLATOR SELECTION
Oscillator Selection on
PICDEM™ 2 Plus
Modification on PICDEM 2 Plus
RC
J7 installed, Y2 empty, Y1 empty
Crystal
J7 removed, Y2 empty, crystal in Y1, caps in C4 and C5
Canned Oscillator
J7 removed, oscillator in Y2 (Y1, C4, C5 empty)
Resonator – no internal caps
J7 removed, Y2 empty, resonator in Y1, caps in C4 and C5
Resonator – with internal caps
J7 removed, Y2 empty, resonator in Y1, C4 and C5 empty