Texas Instruments TPS92310-12 Evaluation Module TPS92310-12FB/NOPB TPS92310-12FB/NOPB Fiche De Données
Codes de produits
TPS92310-12FB/NOPB
GATE
VCC
COMP
ZCD
ISNS
MODE2
AGND
PGND
MODE1
DLY
SNVS792 – FEBRUARY 2012
Connection Diagram
Top View
Figure 2. 10-Pin VSSOP
Pin Descriptions
Pin
Name
Description
Application Information
1
VCC
Power supply input
This pin provides power to the internal control circuitry and gate driver.
Connect a 10µF capacitor from this pin to ground.
Connect a 10µF capacitor from this pin to ground.
2
ZCD
Zero crossing detection input
The pin senses the voltage of the auxiliary winding for zero current
detection.
detection.
3
AGND
Small signal ground
Signal ground.
4
COMP
Compensation network
Output of the error amplifier. Connect a capacitor from this pin to
ground to set the frequency response of the LED current regulation
loop.
ground to set the frequency response of the LED current regulation
loop.
5
DLY
Delay control input
Connect a resistor from this pin to ground to set the delay between
switching ON and OFF periods.
switching ON and OFF periods.
6
MODE2
Mode selection input 2
Select operating mode for isolated or non-isolated mode.
7
MODE1
Mode selection input 1
Select operating mode for peak current mode or constant ON time.
8
PGND
Power ground
Power ground. This pin must be connected to the AGND pin externally
for normal operation. This pin has no internal connection to PGND.
for normal operation. This pin has no internal connection to PGND.
9
ISNS
Current sense voltage feedback
Switch current sensing input.
10
GATE
Gate driver output
Gate driving signal to the external switching MOSFET.
2
Copyright © 2012, Texas Instruments Incorporated
Product Folder Links: