Texas Instruments TPS65810 Evaluation Module TPS65810EVM TPS65810EVM Fiche De Données
Codes de produits
TPS65810EVM
www.ti.com
DESCRIPTION
SLVS658B – MARCH 2006 – REVISED FEBRUARY 2007
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
The TPS65810 provides an easy to use, fully integrated solution for handheld devices, integrating charge
management, multiple regulated power supplies, system management and display functions, in a small
thermally-enhanced 8x8 package. The high level of integration enables typical board area space savings of 70%
when compared to equivalent discrete solutions, while implementing a high-performance and flexible solution,
portable across multiple platforms. If required, an external host may control the TPS65810 via I
management, multiple regulated power supplies, system management and display functions, in a small
thermally-enhanced 8x8 package. The high level of integration enables typical board area space savings of 70%
when compared to equivalent discrete solutions, while implementing a high-performance and flexible solution,
portable across multiple platforms. If required, an external host may control the TPS65810 via I
2
C interface, with
access to all integrated systems. The I
2
C enables setting output voltages, current thresholds, and operation
modes. Internal registers have a complete set of status information, enabling easy diagnostics, and
host-controlled handling of fault conditions. The TPS65810 can operate in stand-alone mode, with no external
host control, if the internal power-up defaults are compatible with the system requirements
host-controlled handling of fault conditions. The TPS65810 can operate in stand-alone mode, with no external
host control, if the internal power-up defaults are compatible with the system requirements
AVAILABLE OPTIONS
(1)
T
J
DEVICES
(2) (3) (4)
MARKING
–40
°
C to 125
°
C
TPS65810RTQ
TPS65810
–40
°
C to 125
°
C
TPS65811RTQ
TPS65811
(1)
For the most current package and ordering information, see the Package Option Addendum at the end
of this document, or see the TI Web site at
of this document, or see the TI Web site at
(2)
The RTQ package is available in tape and reel. Add R suffix (TPS65810RTQR) to order quantities of
2000 parts per reel. Add T suffix (TPS65810RTQT) to order quantities of 250 parts per reel.
2000 parts per reel. Add T suffix (TPS65810RTQT) to order quantities of 250 parts per reel.
(3)
This product is RoHS compatible, including a lead concentration that does not exceed 0.1% of total
product weight, and is suitable for use in specified lead-free soldering processes. In addition, this
product uses package materials that do not contain halogens, including bromine (Br) or antimony (Sb)
above 0.1% of total product weight.
product weight, and is suitable for use in specified lead-free soldering processes. In addition, this
product uses package materials that do not contain halogens, including bromine (Br) or antimony (Sb)
above 0.1% of total product weight.
(4)
Other power-up sequences and default power-up states for the supplies can be implemented upon
request. Consult factory for available options
request. Consult factory for available options
2
Copyright © 2006–2007, Texas Instruments Incorporated
Product Folder Link(s):