Cypress Semiconductor CY3280-MBR3 Manuel D’Utilisation
CY3280-MBR3 Evaluation Kit User Guide, Doc. #: 001-89905 Rev. *B
26
Kit Operation
Figure 3-15. Kit Buttons Corresponding to CapSense Sensor Pins
10.Enable the corresponding LEDs in the Global configuration tab, as shown in
, to
view the LED output for each button touch. Ensure that the GPO logic level is Active Low
because the LEDs on the CY3280-MBR3 EVK are active low.
because the LEDs on the CY3280-MBR3 EVK are active low.
Note: LED1/GPO3, LED2/GPO4, LED3/GPO5, and LED4/GPO6 on the CY3280-MBR3 EVK
correspond to LED4, LED5, LED6, and LED7 in the EZ-Click 2.0 customizer tool, which map to
the general-purpose output (GPO) pins CS11/GPO3, CS12/GPO4, CS13/GPO5, and CS14/
GPO6 respectively on the MBR3 device.
correspond to LED4, LED5, LED6, and LED7 in the EZ-Click 2.0 customizer tool, which map to
the general-purpose output (GPO) pins CS11/GPO3, CS12/GPO4, CS13/GPO5, and CS14/
GPO6 respectively on the MBR3 device.
Figure 3-16. Global Configuration Tab