Texas Instruments UCD3138 Evaluation Module UCD3138OL64EVM-031 UCD3138OL64EVM-031 Fiche De Données
Codes de produits
UCD3138OL64EVM-031
Test Procedure
6.
Press Reset button once on the board. Click Command ROM to execute its program
(sendByte0xF0 to Address 11). The firmware downloaded is executed, and the executed result is
transmitted to the hyper terminal as shown.
(sendByte0xF0 to Address 11). The firmware downloaded is executed, and the executed result is
transmitted to the hyper terminal as shown.
Figure 17. Execution Result of Example Test
7.3
Equipment Shutdown
1. Exit the GUI and UART.
2. Disconnect the cables.
21
SLUUA10 – October 2012
Using the UCD3138OL64EVM-031
Copyright © 2012, Texas Instruments Incorporated