ASUS Terminator P4 533 P4SC/LAN Manuel D’Utilisation
Codes de produits
P4SC/LAN
26
Chapter 2: Basic Installation
2.7
Install a CD-ROM drive
A CD-ROM drive is an optional item in this barebone system. Refer to the
instructions in this section if you acquired a model without a CD-ROM.
instructions in this section if you acquired a model without a CD-ROM.
Follow these steps to install a
CD-ROM drive.
CD-ROM drive.
1.
Place the chassis upright.
2.
Insert the CD-ROM drive into
the upper 5.25-inch drive bay.
the upper 5.25-inch drive bay.
CD-ROM screws
3.
Carefully push the CD-ROM
drive into the bay until its
screw holes align with the
holes (marked 1) on the bay
as shown.
drive into the bay until its
screw holes align with the
holes (marked 1) on the bay
as shown.
4.
Secure the CD-ROM with two
screws on each side of the
bay.
screws on each side of the
bay.
5.25-inch drive bay