Texas Instruments Clock Jitter Cleaner With Dual Cascaded PLLs and Integrated 2.5 GHz VCO LMK04806BEVAL/NOPB LMK04806BEVAL/NOPB Fiche De Données
Codes de produits
LMK04806BEVAL/NOPB
L M K 0 4 8 X X E V A L U A T I O N B O A R D O P E R A T I N G I N S T R U C T I O N S
32
Phase Detector Polarity
PLL2_CP_POL
PLL2 Phase Detector Polarity.
Click on the polarity sign to toggle polarity
“+” or “–”.
Click on the polarity sign to toggle polarity
“+” or “–”.
Charge Pump Gain
PLL2_CP_GAIN
PLL2 Charge Pump Gain.
Left-click/right-click to increase/decrease
charge pump gain (100, 400, 1600, 3200
uA).
Left-click/right-click to increase/decrease
charge pump gain (100, 400, 1600, 3200
uA).
Charge Pump State
PLL2_CP_TRI
PLL2 Charge Pump State.
Click to toggle between Active and Tri-State.
Click to toggle between Active and Tri-State.
Changes made on this tab will be reflected in the Clock Outputs tab. The VCO Frequency
should conform to the specified internal VCO frequency range for the LMK048xxB device (per
Table 2).
Bits/Pins Tab
Figure 13: Bits/Pins tab
The Bits/Pins tab allows the user to program bits directly, many of which are not available on
other tabs. Brief descriptions for the controls on this tab are provided in Table 10 to supplement
the datasheet. Refer to the
TIP: Right-clicking any register name in the Bits/Pins tab will display a Help prompt with the
register address, data bit location/length, and a brief register description.
register address, data bit location/length, and a brief register description.