Texas Instruments TAS5710 Evaluation Module (EVM) TAS5710EVM TAS5710EVM Fiche De Données
Codes de produits
TAS5710EVM
4.1
2 X BTL BDAD (Default: BD mode)
5
Advanced Audio Processing Features in TAS5710
www.ti.com
Advanced Audio Processing Features in TAS5710
Common Configurations:
1. 2
×
BTL BD Mode
2. 2
×
BTL AD Mode
Note:
AD : AD Modulation-Outputs are 180
°
out of phase
BD : BD Modulation
BTL : Bridge-Tied Load
1. Set up the hardware.
2. GDE: Select the Input MUX. In the Properties window, select Modulation scheme as BD for BD Mode.
2. GDE: Select the Input MUX. In the Properties window, select Modulation scheme as BD for BD Mode.
For AD Mode, select AD.
3. GDE: Target > Connect.
4. Finally uncheck the shutdown box to bring the device out of Shutdown mode, and adjust the Master
4. Finally uncheck the shutdown box to bring the device out of Shutdown mode, and adjust the Master
Volume as desired.
TAS5710 Process Structure is as shown in GDE:
The three built-in functions in the Properties window are:
1. Surround (3D): ON/OFF
2. Bass Boost (Pseudo Bass): ON/OFF
3. Two-Band DRC (2-Band DRC): ON/OFF
2. Bass Boost (Pseudo Bass): ON/OFF
3. Two-Band DRC (2-Band DRC): ON/OFF
Each of these features are explained as follows:
1. Surround (3D): ON/OFF
Turn it ON. Then L-R terms get mixed with raw L and R after band-pass filtering. The L-signal is RED,
the R-signal is BLUE, and the L-R signal is BLACK.
the R-signal is BLUE, and the L-R signal is BLACK.
SLOU232A – January 2009 – Revised January 2009
TAS5708(TAS5710)EVM
13