Microchip Technology PICkit 3 Starter Kit DV164130 DV164130 Manuel D’Utilisation
Codes de produits
DV164130
PICkit™ 3 User’s Guide
DS51795A-page 16
© 2009 Microchip Technology Inc.
The modular cable can be either (1) inserted into a matching socket at the target, where
the target device is on the target board (Figure 2-1), or (2) inserted into a standard
adapter/header board combo (available as a Processor Pak), which in then plugged
into the target board (Figure 2-2).
the target device is on the target board (Figure 2-1), or (2) inserted into a standard
adapter/header board combo (available as a Processor Pak), which in then plugged
into the target board (Figure 2-2).
For more on standard communication, see Chapter 10. “Hardware Specification”.
FIGURE 2-1:
STANDARD DEBUGGER SYSTEM – DEVICE WITH
ON-BOARD ICE CIRCUITRY
ON-BOARD ICE CIRCUITRY
FIGURE 2-2:
STANDARD DEBUGGER SYSTEM – ICE DEVICE
Note:
Older header boards used a 6-pin (RJ-11) connector instead of an 8-pin
connector, so these headers may be connected to the debugger with the
AC164110 ICSP adapter.
connector, so these headers may be connected to the debugger with the
AC164110 ICSP adapter.
Target Device
or PIM
Power
PICkit™ 3
Mini-USB
to PC
cable
Target Board
Target Board
Transition Socket
Device-ICE
AC164110
Adapter
Header
Power
PICkit™ 3
Mini-USB
to PC
cable