Corsair 4GB Kit, 240pin DIMM, 4-4-4-12, PC2-6400 TWIN2X4096-6400C4DHX Fascicule

www.corsair.com

The Twin2X4096-6400C4DHX  is  a  4096MByte  matched  pair  of  DDR2  SDRAM  DIMMs  built  using  Corsair’s  latest 

high  performance  heat  sink  with  Dual-Path  Heat  Xchange  (DHX)  technology.    This  part  delivers  outstanding 

performance in the latest generation of dual-channel DDR2-based motherboards. It has been tested extensively 

in  multiple  DDR2  motherboards  to  ensure  compatibility  and  performance  at  its  rated  speed. This  memory  has 

been verified to operate at 800MHz at the low latencies of 4-4-4-12.  

Those users installing 4GB or more of memory may notice the total amount of available memory being less than 4GB.  The amount available depends on the system configuration and the 
way the operating system addresses physical memory. Every part is tested in Corsair's factory at 800MHz, but your actual results may vary depending on the overclocking margin of your 
CPU and motherboard. Newer motherboards may be used for production test as they become available. Corsair may periodically update the part with newer RAM revisions of same or 
greater performance. RAM used on the module may change without notice. © January 2008 Corsair Memory, Inc.



 

4096 Megabytes of DDR2 memory



  Two matched CM2X2048-6400C4DHX 

modules

 

Unique DHX technology providing maximum cooling



 

Designed for 64-bit operating systems



 

100% tested at 800MHz in high performance DDR2 

motherboards



  Lifetime warranty



Each module set is tested together at 800MHz



  Tested and packaged together

 

Packaged together immediately following 

system test

 

Tested at latency settings (4-4-4-12) at 2.1V

 

SPD programmed at: 

   

JEDEC standard 5-5-5-18 values at 800MHz

 

 

 

• Optimized fins to maximize ambient airflow through the module array

• Extruded aluminum heat sinks to maximize convective heat dissipation

• Dedicated PCB heat sink