Renkforce Cordless remote control Max. range (open field) 30 m Used at Indoors 1208459 Manuel D’Utilisation

Select one of the address codes (I, II, III, IV) on the handheld radio transmitter via the sliding switch (C). 

Set exactly the same address code on the radio-controlled switch socket(s).

   If you set a different code on the handheld radio transmitter and the radio- controlled switch sock-

et, the switch socket will not react to the switching commands on the handheld radio transmitter!

 

For the settings of the radio-controlled switch socket please refer to its operating instructions.

If you press the “ON” button of the corresponding switching channel (1, 2, 3 or 4), the respective radio-

controlled switch socket is activated. The red control LED on the radio-controlled switch socket has to 

light up and the load connected to it will be switched on.
The radio-controlled switch socket and the load connected to it are switched off using the “OFF” key of 

the corresponding switching channel.
Please consult the operating instructions for further information on the radio-controlled switch socket.

The product is maintenance free for you; never open/dismantle it (except for inserting/replacing the bat-

tery as described in these operating instructions).
Only clean the product with a soft, clean, dry cloth. Never use aggressive cleaning agents or chemical 

solutions since these could damage the surface of the casing or impair operation.

The transmission range of the radio signals, between the handheld transmitter and the radio-controlled 

switch sockets, is up to 30 m under optimum conditions.

    This value, however, is the so-called “open space range” (the range when transmitter and 

receiver are visible to each other, without interfering influences).

 

 In practice, however, there may be walls, room ceilings, etc. between the transmitter and the 

receiver which reduce the range accordingly.

 

 Due to the different influences on the wireless transmission, no specific range can be guaran-

teed.

 

However, trouble-free operation is usually possible in a single family house. 

Sometimes the range can be considerably reduced due to:
•  Walls, reinforced concrete ceilings
•  Coated/metallised insulated glass
•  Proximity to metallic & conductive objects (e.g., heating elements)
•  Proximity to human bodies
•   Broadband interferences, e.g., in residential areas (DECT telephones, mobiles, radio-controlled head-

phones, radio-controlled speakers, other radio-controlled weather stations, baby phones, etc.)

•  Proximity to electric motors, transformers, power-supply units, computers
•  Proximity to badly shielded or uncovered computers in use or other electrical appliances

   Please dispose of the device, when it is no longer of use, according to current statutory re-

quirements.

 

Remove the inserted battery and dispose of it separately from the product.

As the end user, you are required by law (Battery Regulation) to return used batteries and rechargeable 

batteries. Do not dispose of used batteries in the household waste!

   Contaminated batteries/rechargeable batteries are labelled with this symbol to indicate that 

disposal in the domestic waste is forbidden. The symbols of the critical heavy metals are: 

Cd=Cadmium, Hg=Mercury, Pb=Lead (name written on the battery/rechargeable battery, e.g., 

under the rubbish bin symbol on the left).

You can return your used batteries/rechargeable batteries free of charge at the official collection points of 

your community, in our stores, or at places where batteries or rechargeable batteries are sold.
You thereby fulfil your statutory obligations and contribute to the protection of the environment.

We, Conrad Electronic, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that this product con-

forms to the fundamental requirements and the other relevant regulations of the directive 1999/5/EC.

  You can find the conformity declaration for this product at www.conrad.com.

Power supply ..................................................... 1x 12 V battery, type “23A”
Transmission frequency ................................... 433 MHz
Address codes................................................... 4 (to be set via the sliding switch I, II, III, IV)
Switching channels .......................................... 4 (each with “ON”/”OFF”-button)
Range .................................................................. up to 30 m (open space, see chapter “Range”)
LED....................................................................... lights up briefly, when the buttons are used

G   Operating Instructions

The product is used as an additional handheld radio transmitter for the suitable radio-controlled switch 

set (available separately).
Always observe the safety instructions and all other information included in these operating instructions!
This product complies with the applicable national and European requirements. All names of companies 

and products are the trademarks of the respective owners. All rights reserved.

•  Handheld radio transmitter
•  12 V battery (type 23 A)
•  Operating instructions

 

•   Unauthorised conversion and/or modification of the product is not allowed for safety and 

approval reasons (CE).

 

•  The product is not a toy and should be kept out of the reach of children! 

 

•   Do not use this product in hospitals or medical institutions. Although the product only emits 

relatively weak radio signals, these may lead to the malfunction of life-support systems. 

The same may also apply to other zones.

 

•   The product must only be used in dry interiors, it must not get damp or wet. 

 

•   Do not leave packaging material carelessly lying around, since it could become a danger-

ous plaything for children.

 

•   Handle the product with care, it can be damaged by impacts, blows, or accidental falls, 

even from a low height.

•  Batteries should be kept out of the reach of children.
•   Do not leave batteries lying around; there is a risk of them being swallowed by children or domestic 

animals. If they are swallowed, consult a doctor immediately.

•   Leaking or damaged batteries can lead to caustic burning of the skin. Therefore, use suitable protective 

gloves. 

   Liquids leaking from batteries are very chemically aggressive. Objects or surfaces coming into contact 

with these liquids might be considerably damaged. Thus, store batteries in a suitable location.

•   Batteries must not be short-circuited, opened or thrown into fire. There is a risk of explosion!
•  Do not recharge standard, non-rechargeable batteries, danger of explosion! 
•  Please pay attention to the correct polarity (plus/+ and minus/-) when inserting the battery.

A  Control-LED (lights up on use of buttons) 
B  Keypad for switching channels 1 bis 4 (left column 
 

“ON” = On, right column “OFF” = Off)

C  Coding switch I, II, III, IV for one of the four 
 

address codes

D  Battery compartment

Open the battery compartment (D) on the back of the handheld radio transmitter and insert a type “23A” 

battery with the correct polarity (observe imprint in the battery compartment or the figure above). Close 

the battery compartment again.
The batteries need to be replaced if the range of the handheld radio transmitter is significantly reduced or 

the control-LED (A) no longer lights when the buttons are used.

One of the four address codes (I, II, III, IV) can be set on both the handheld radio transmitter and the radio-

controlled switch socket. Therefore, up to four identical radio-controlled switch sets can be operated 

without influencing each other.

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). 
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data 

processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent 

the technical status at the time of printing.  
© Copyright 2014 by Conrad Electronic SE.