C&E PTC fan heater 20 m² Silver PTC-902 PTC-902 Fiche De Données

This portable heater offers convenient warmth to any room of your home. It is compact enough 

to fit on a desk, table or counter. It features a thermostat with two heat settings and a cooling

function. The heater provides oscillation feature to increase ventilation. The overheat protection 

function and the tilt switch ensures safe operation. 

This heater must only be connected to a 230V~/50Hz mains outlet. The product can only be 

operated in dry indoors. It is not suitable for damp and wet conditions.

Unauthorised conversion and/or modification of the device are inadmissible because of safety

and approval reasons (CE). Any usage other than described above is not permitted and can 

damage the product and lead to associated risks such as short-circuit, fire, electric shock, etc.

Please read the operating instructions thoroughly and keep them for further reference.

Heater

•

Operating instructions

•

Never use the device without a protective grill. Do not put any objects through the safety 

•

guard.

Make  sure  the  appliance  is  located  far  enough  away  from  all  objects  in  order  to  ensure 

•

adequate air circulation.

Do not use the device in close proximity to a bathtub, shower or swimming pool.

•

Do not position the device right underneath a mains outlet.

•

Do not operate the device in conjunction with a separate timer, a separate remote control 

•

system or other equipment which could turn the device on automatically. This would constitute 

a fire hazard if the device were covered or otherwise positioned incorrectly.

The product is not a toy and must be kept out of the reach of children. Be especially careful 

•

if children are around. Children cannot assess the danger from incorrect use of electrical 

devices.  Children  could  try  to  insert  items  into  the  device,  risking  a  fatal  electric  shock. 

Furthermore, the hot surfaces may induce injury or fire. Install the product so that it cannot be

reached by children.

Do not leave the packaging material lying around carelessly since it constitutes a danger to 

•

children.

Only a electrical source of 230V~/50Hz mains outlet with a protective conductor (wall socket) 

•

should be used. Never try to operate the device with another voltage.

The product is only designed for use in closed, dry indoors locations. It must not get damp or 

•

wet, as it may cause danger of electric shock.

Never touch the product with damp or wet hands.

•

Never use the heater in any vehicles or other areas or places in motion.

•

Insert or remove the plug from the socket by gripping the plug. Do not pull on the cord .

•

Unwind the mains cable completely. If the mains cable is not completely unwound, it can 

•

cause overheating, leading to a fire hazard.

The power cable must not be pinched or damaged by sharp edges. Do not place any objects 

•

on the mains cable. Do not allow it to become entangled.

Install the mains cable so that it will not be tripped over. Make sure that the mains plug is easily 

•

accessible.

Do not cover the mains cable under carpets, etc.

•

Do not use extension cables, ballast, dimmer etc. Insert the mains plug directly into a wall 

•

socket.

Do not use the product when it is damaged (e.g. housing, mains cable). A defective connecting 

•

cable must be replaced only by a specialist. Improper replacement may cause a fatal electric 

shock.

For safety reasons, pull the mains plug out of the mains socket before cleaning the device, 

•

during a thunderstorm or when the device will not be used for a longer period of time.

Always leave a space of at least 1.5 m from combustible or flammable materials or items

•

(curtains, doors, furniture etc.). If the distance is too short, there is a risk of fire.

Do not cover the unit.  Do not touch the openings of the product. Do not insert objects in the 

•

openings. This may lead to a fatal electric shock or fire hazards

Never pour liquids onto or next to the product. You risk a fire hazard or a fatal electric shock.

•

However,  if  liquids  get  into  the  device,  immediately  isolate  the  mains  socket  (fuse),  then 

separate the mains plug from the mains socket and consult an expert. Do not operate the 

device anymore.

It is not permitted to operate the device in environments with a high dust content, flammable

•

gases, vapours or solvents. There is a danger of fire and explosion.

Never place the product on an unstable or moving surface. Always set up the heater so that 

•

it cannot tilt or fall. Tilting/falling can cause a fire hazard causing injury or product damage.

The safety switch integrated at the base of the device deactivates in this situation, but there 

remains a risk of fire caused by the hot surfaces of the heater.

Do not operate the product when it is unattended.

•

The air outlet will become very hot within a short period, causing a danger of being burnt. Take 

•

the necessary care in using the heater.

When using the heater for the first time, the heated casing may give off an irritating odour for

•

some time. If you experience this, ventilate the room where the heater is operating.

Only move, transport or store the product when it has cooled down completely. Disconnect the 

•

mains unit from the mains voltage and pull the plug out of the power socket.

Only use the device in a temperate climate, not a tropical climate.

•

Never  connect  the  product  directly  after  transferring  it  from  a  cold  to  a  warm  room.  The 

•

condensation water that develops after such a transfer could damage the device or cause 

an electric shock. Allow the appliance to reach room temperature. Wait until the condensation 

water has evaporated. This might take several hours. Only after this should it be plugged in to 

the mains supply and put into use.

The product is not suitable for commercial use. 

•

The product must not be subjected to heavy mechanical stress.

•

The product must not be exposed to extreme temperatures, direct sunlight, intense vibration, 

•

or dampness.

If there is reason to believe that safe operation is no longer possible, the device is to be put out 

•

of operation and secured against unintended operation. Safe operation is no longer possible 

if the device:

shows visible damages,

 -

no longer works,

 -

was stored under unfavourable conditions for a long period of time or

 -

was subject to considerable transport stress

 -

Servicing,  adjustment  or  repair  works  must  only  be  carried  out  by  a  specialist/  specialist 

•

workshop.

If any questions arise that are not answered in this operating instruction, contact our Technical 

•

Advisory Service or other experts.

Thermostat control

1. 

Mode selector

2. 

Control light

3. 

Anti-tilt protection switch

4. 

Oscilliation button

5.