Insys GSM 4.2 LOGO! compact KIT 11-02-01-03-04.004 Manuel D’Utilisation
Codes de produits
11-02-01-03-04.004
INSYS GSM 4.2 LOGO!
HSComm
Dezember 06
31
5
Configuration using the HSComm LOGO! Software
5.1
General
The HSComm LOGO! software is used to assign parameters for the INSYS GSM 4.2
LOGO! in Windows. No explicit knowledge of the AT commands and their
parameters is required to use this software. The settings are only transferred to
the INSYS GSM 4.2 LOGO! by activating the “Send” instruction. Likewise, the
settings are only read out by activating the “Read settings” instruction.
The HSComm LOGO! parameter assignment software can be downloaded free of
charge on the Internet: http://www.insys-tec.de
LOGO! in Windows. No explicit knowledge of the AT commands and their
parameters is required to use this software. The settings are only transferred to
the INSYS GSM 4.2 LOGO! by activating the “Send” instruction. Likewise, the
settings are only read out by activating the “Read settings” instruction.
The HSComm LOGO! parameter assignment software can be downloaded free of
charge on the Internet: http://www.insys-tec.de
5.2
Help
Context-sensitive Help can be called at any time using the F1 key or the Help
menu.
A complete command reference for the expanded INSYS AT commands can also
be found in Help.
menu.
A complete command reference for the expanded INSYS AT commands can also
be found in Help.
5.3
Menus
5.3.1 File
The current settings as displayed in the HSComm interface can be saved as a file
and redisplayed.
and redisplayed.