Voltcraft LCR 4080 Digital-Multimeter, DMM, 20000 digits 41 R Fiche De Données

Measuring unipolar or bipolar capacitor (C) of approx. 5 pF up to 10000 µF= 10 mF

Measuring resistors (R) up to max. 10 MOhm

Measuring inductors (L) up to 10000 H

It is not admissible to carry out measurements in wet rooms or outdoors or
under adverse environmental conditions. Adverse environmental conditions
are: 

- dampness or high humidity

- dust or inflammable gases, vapors or solvents

- thunderstorms and stormy conditions like strong electrostatic fields 

Any other use than the one described above damages the measuring instru-
ment. Moreover, this involves dangers, such as short-circuit, fire, electric
shock, etc. No part of the product may be modified or rebuilt! 

Observe the safety instructions and technical data.

1.

-On/ off button

2.

"FREQ" button for changing the measuring frequency

3.

"PAR / SER” parallel / Series button (high or low impedance)

4.

"RANGE" button for a manual or automatic range selection 

5.

"L/C/R" button for changing from the measuring of inductors "L"

to the measuring of capacitors "C" 

or the measuring of resistors "R"

6.

"Q/D/R" button for reversing the corrective factors for the parallel or
series measurement: 

Q for the quality, 

D for the dissipation factor (= 1/Q)

and R for the parallel or series resistor 

25