Fluke 114 Digital Multimeter LCD, 6000 counts 2583552 Fiche De Données
Codes de produits
2583552
True-rms Multimeters
Making
Basic
Measurements
15
Testing Diodes (115 & 117)
Forward Bias
Single
Beep
Beep
Reverse Bias
Shorted
and
Open
Bad Diode
Bad Diode
Good Diode
Good Diode
edy07f.eps
Using the Bargraph
The bar graph is like the needle on an analog meter. It has
an overload indicator (
an overload indicator (
>) to the right and a polarity
indicator (
+)to the left.
Because the bar graph is much faster than the digital
display, the bar graph is useful for making peak and null
adjustments.
display, the bar graph is useful for making peak and null
adjustments.
The bar graph is disabled when measuring capacitance. In
frequency, the bar graph and range annunciator indicates
the underlying voltage or current up to 1 kHz.
frequency, the bar graph and range annunciator indicates
the underlying voltage or current up to 1 kHz.
The number of segments indicates the measured value and
is relative to the full-scale value of the selected range.
is relative to the full-scale value of the selected range.
In the 60 V range, for example (see below), the major
divisions on the scale represent 0, 15, 30, 45, and 60 V. An
input of
divisions on the scale represent 0, 15, 30, 45, and 60 V. An
input of
−30 V turns on the negative sign and the segments
up to the middle of the scale.
aej11f.eps