Panasonic HDC-SD9EG-S Manuel D’Utilisation
23
VQT1N58
[QUICK START] (l 35)
[BEEP SOUND]
[LCD AI] (l 28)
[LCD SET] (l 27)
[LCD SET] (l 27)
[COMPONENT OUT] (l 78)
[HDMI RESOLUTION] (l 77)
[VIERA Link] (l 79)
[VIERA Link] (l 79)
[TV ASPECT] (l 76)
[INITIAL SET]
[INITIAL SET]
[DEMO MODE]
∫ [LANGUAGE] (
l 22)
Playback mode
(
[
]
motion picture playback)
∫ [VIDEO SETUP]
[REPEAT PLAY] (l 64)
[RESUME PLAY] (l 64)
[REPEAT PLAY] (l 64)
[RESUME PLAY] (l 64)
[SCENE PROTECT] (l 71)
*1
[GUIDE LINES] (l 47)
∫ [EDIT SCENE]
∫ [EDIT SCENE]
*1
[DIVIDE] (l 70)
[DELETE] (l 69)
∫ [DISC SETUP]
[DELETE] (l 69)
∫ [DISC SETUP]
*2
[FORMAT DISC] (l 87)
[AUTO PROTECT] (l 87)
[INFORMATION] (l 87)
≥ For any other menus that are not described
≥ For any other menus that are not described
above, refer to menus with the same names for
the recording mode.
the recording mode.
(
[
]
still picture playback)
∫ [PHOTO SETUP]
*1
[SCENE PROTECT] (l 71)
[DPOF SET] (l 72)
[DPOF SET] (l 72)
[DELETE] (l 69)
∫ [SETUP]
[FORMAT DISC] (l 87)
∫ [SETUP]
[FORMAT DISC] (l 87)
*2
≥ For any other menus that are not described
above, refer to menus with the same names for
the recording mode and motion picture
playback.
the recording mode and motion picture
playback.
*1 When the disc playback tab [
] is
selected while a DVD burner (optional) is
connected, or when [INTEL. SCENE] (l 63)
connected, or when [INTEL. SCENE] (l 63)
is selected, this does not appear.
*2 Only when the disc playback tab [
] is
selected while a DVD burner (optional) is
connected, this appears.
connected, this appears.
This allows operations such as starting and
ending recording to be signaled by a beep.
1 Beep
When you start recording
When you turn on the power
When this unit is recognised by the PC or the
printer, etc.
2 Beeps
When you pause recording
When you turn off the power
2 Beeps for 4 times
When an error occurs. Check the sentence
displayed on the screen. (l 107)
ending recording to be signaled by a beep.
1 Beep
When you start recording
When you turn on the power
When this unit is recognised by the PC or the
printer, etc.
2 Beeps
When you pause recording
When you turn off the power
2 Beeps for 4 times
When an error occurs. Check the sentence
displayed on the screen. (l 107)
Set to [YES] for changing the menu settings
back to the default condition.
(The language setting cannot be changed
back to the default condition.)
back to the default condition.
(The language setting cannot be changed
back to the default condition.)
This item is used to start the unit
demonstration.
(Only when the mode switch is at the
demonstration.
(Only when the mode switch is at the
position)
If [DEMO MODE] is switched [ON] when there
is no SD card inserted, the demonstration
automatically starts. If any operation takes
place, the demonstration is cancelled.
However if no operations take place for
approx. 10 minutes, the demonstration
automatically starts again. To stop the
demonstration, set [DEMO MODE] to [OFF] or
insert an SD card.
If [DEMO MODE] is switched [ON] when there
is no SD card inserted, the demonstration
automatically starts. If any operation takes
place, the demonstration is cancelled.
However if no operations take place for
approx. 10 minutes, the demonstration
automatically starts again. To stop the
demonstration, set [DEMO MODE] to [OFF] or
insert an SD card.
HDCSD9EP-VQT1N58_eng.book 23 ページ ２００８年１月１０日 木曜日 午後９時３６分