Redpitaya RED PITAYA, OPEN SOURCE LAB RED Pitaya V 1.1 Fiche De Données
Codes de produits
RED Pitaya V 1.1
9
3 Getting started
3.1 Connecting to Red Pitaya
Red Pitaya is a network attached device acting as a WEB server. Users can connect to Red Pitaya
by simply typing its IP address in the WEB browser address bar. Furthermore, the
by simply typing its IP address in the WEB browser address bar. Furthermore, the
address discovery utility which automatically connects to Red Pitayas in your local network. The
following paragraphs provide detailed information about Red Pitaya connection.
following paragraphs provide detailed information about Red Pitaya connection.
3.2 Network DHCP configuration
By default, Red Pitaya obtains its network settings using DHCP protocol (see Figure 3). If no reply
from the DHCP server is obtained within 20 seconds, Red Pitaya will configure its network
interface to:
from the DHCP server is obtained within 20 seconds, Red Pitaya will configure its network
interface to:
IP address: 192.168.1.100
Netmask: 255.255.255.0
Figure 3: Default network configuration (DHCP) with fallback to 192.168.1.100.
If default configuration is not suitable, follow the instructions in Chapter 3.4 for custom network
interface configuration.
interface configuration.
3.3 Red Pitaya SD card preparation
In case your Red Pitaya package does not contain a micro SD card you need to install the Red
Pitaya software to an empty micro SD card. Follow this procedure:
Pitaya software to an empty micro SD card. Follow this procedure:
Download the Red Pitaya SD card image zip file from the
Insert the Micro SD card into the PC's SD slot. Use an adapter if required.