Redpitaya RED PITAYA, OPEN SOURCE LAB RED Pitaya V 1.1 Fiche De Données
Codes de produits
RED Pitaya V 1.1
12
Interfaces and steps mentioned above are indicated in Figure 5.
Figure 5: Boot up procedure in steps
3.6 Red Pitaya command line access
3.6.1 Console (USB) connection
Serial console connection is independent from the Ethernet connection. Use a Micro USB cable to
connect your computer with Red Pitaya. Connection instructions will be given for Windows, Linux
and OS X users separately.
The serial port configuration is given in Table 3.
connect your computer with Red Pitaya. Connection instructions will be given for Windows, Linux
and OS X users separately.
The serial port configuration is given in Table 3.
Table 3: Console connection parameters.
Parameter
Value
Speed
115200
Data bits
8
Stop bits
1
Parity
None
Flow control
None
Neither username nor password is required. Boot-up sequence finishes with a UNIX shell command
prompt:
redpitaya>
3.6.1.1 Windows users
Download and install the FTD driver to your PC. After installation, a new COM port will appear in
the Device Manager which you will use in Hyperterminal or another terminal utility to connect to
Red Pitaya.
the Device Manager which you will use in Hyperterminal or another terminal utility to connect to
Red Pitaya.