Corsair XMS3 DHX TWIN3X2048-1600C7DHXIN Fascicule

Codes de produits
TWIN3X2048-1600C7DHXIN
Page de 1
www.corsair.com 
The  TWIN3X2048-1600C7DHXIN  G  is  a  2048MByte  kit  of  DDR3  SDRAM  DIMMs  based  upon 
Corsair’s  high  performance  XMS3  DHX  family  of  memory  which  includes  Intel’s  Extreme 
Memory Profiles (XMP).  XMP is a JEDEC based performance specification for DDR3 memory 
SPD  optimizations  developed  by  Intel  and  its  performance  memory  module  partners.    This 
enables  a  robust,  profile  based  high  performance  DDR3  over-clocking  solution  for  Intel 
platforms  targeted  for  enthusiasts,  gamers  and  overclockers  who  want  to  extract  maximum 
performance  from  their  platforms.    Built  using  Corsair’s  Dual-path  Heat  Xchange  (DHX) 
technology,  this  part  delivers  outstanding  performance  with  the  Intel’s  Extreme  Series  of 
DDR3-based  motherboards  and  has  been  tested  extensively  to  ensure  compatibility  and 
performance  at  its  rated  speed.  This  memory  has  been  verified  to  operate  at  1600MHz  at 
latencies of 7-7-7-20 at 1.8V VDIMM.
TWIN3X2048-1600C7DHXIN G
Every part is tested in Corsair's factory at 1600MHz, but your actual results may vary depending on the overclocking margin of your CPU and motherboard. Newer motherboards may be 
used for production test as they become available. Corsair may periodically update the part with newer RAM revisions of same or greater performance. RAM used on the module may 
change without notice. © September 2007 Corsair Memory, Inc.
 
2048 Megabytes of DDR3 memory
  Two matched CM3X1024-1600C7DHXIN G 
modules
 
DHX technology provides maximum cooling 
 
Supports Intel Extreme Memory Profiles (XMP)
 
100% tested at 1600MHz in Intel Extreme Series 
DDR3 motherboards
  Lifetime warranty
FEATURES
TEST SPECS
 
Each module pair is tested together at 1600MHz
  
Packaged together immediately following 
system test
 
Tested together at 1600MHz, Vdimm = 1.8V, 
at latency settings of 7-7-7-20 on Intel Extreme 
Series motherboards
 
SPD programmed at:
  
XMP 7-7-7-20 values at 1600MHz
 
JEDEC standard 9-9-9-24 values at
 
1333MHz
 
 
Dual-path Heat Xchange Diagram
• Optimized fins to maximize ambient airflow through the module array
• Extruded aluminum heat sinks to maximize convective heat dissipation
• Dedicated PCB heat sink