Corsair DOMINATOR TWIN2X4096-8500C5DF Fascicule
Codes de produits
TWIN2X4096-8500C5DF
www.corsair.com
The Dominator Series Twin2X4096-8500C5DF is 4096MBytes of DDR2 SDRAM DIMMs built using Corsair’s latest
high performance heat sink with Dual-Path Heat Xchange (DHX) technology coupled with a Corsair Dominator
Airflow Fan. This memory has been verified to operate at 1066MHz at latencies of 5-5-5-15-2T at 2.1VDIMM. The
Twin2X4096-8500C5DF comes with Enhanced Performance Profiles (EPP), the open standard for performance
module SPD’s jointly developed by Corsair and NVIDIA. EPP SPD’s on Corsair modules allow users to automatically
configure EPP enabled motherboards with aggressive memory performance settings, for maximum memory and
system performance.
TWIN2X4096-8500C5DF
Those users installing 4GB or more of memory may notice the total amount of available memory being less than 4GB. The amount available depends on the system configuration and the
way the operating system addresses physical memory. Every part is tested in Corsair's factory at 1066MHz, but your actual results may vary depending on the overclocking margin of
your CPU and motherboard. Newer motherboards may be used for production test as they become available. Corsair may periodically update the part with newer RAM revisions of same
or greater performance. RAM used on the module may change without notice. © February 2008 Corsair Memory, Inc.
way the operating system addresses physical memory. Every part is tested in Corsair's factory at 1066MHz, but your actual results may vary depending on the overclocking margin of
your CPU and motherboard. Newer motherboards may be used for production test as they become available. Corsair may periodically update the part with newer RAM revisions of same
or greater performance. RAM used on the module may change without notice. © February 2008 Corsair Memory, Inc.
FEATURES
4096 Megabytes of DDR2 memory
Two matched CM2X2048-8500C5D modules
Includes Airflow Fan for maximum thermal transfer
Enhanced Performance Profiles allow
automatic overclocking to aggressive
performance settings
100% tested at 1066MHz in high performance
DDR2 motherboards
Lifetime warranty
TEST SPECS
Each module set is tested together at 1066MHz
Tested and packaged together
Packaged together immediately following
system test
Tested at EPP SPD settings (5-5-5-15-2T) at
2.1V at 1066MHz
SPD programmed at:
JEDEC standard 5-5-5-18 values at 800MHz
EPP standard 5-5-5-15-2T, 2.1V values
Dual-path Heat Xchange Diagram
• Optimized fins to maximize ambient airflow through the module array
• Extruded aluminum heat sinks to maximize convective heat dissipation
• Dedicated PCB heat sink