Thecus 1.5TB Server N3200 N3200_3050 Fascicule
Codes de produits
N3200_3050
Chapter 3: First Time Setup
Overview
Once the hardware is installed, physically connected to your network, and
powered on, you can configure the N3200 so that it is accessible to your network
powered on, you can configure the N3200 so that it is accessible to your network
users. Follow the steps below for initial software setup.
Thecus Setup Wizard
The handy Thecus Setup Wizard makes configuring N3200 a snap. To configure
the N3200 using the Setup Wizard, perform the following steps:
1. Insert the installation CD into your CD-ROM drive (the host PC must be
connected to the network).
2. The Setup Wizard should launch automatically. If not, please browse your
CD-ROM drive and double click on Setup.exe.
For MAC OS X users, double click on Thecus Setup Wizard 1.1.6.dmg
NOTE
3. The Setup Wizard will start and automatically detect all Thecus storage
devices on your network. If none are found, please check your connection
for assistance.
4. Select the N3200 that you like to configure. Press Next to continue.
14