Analog Devices AD5754R Evaluation Board EVAL-AD5754REBZ EVAL-AD5754REBZ Fiche De Données
Codes de produits
EVAL-AD5754REBZ
EVAL-AD5754R
Rev. 0 | Page 5 of 12
EVALUATION BOARD SOFTWARE
INSTALLING THE SOFTWARE
The AD5754R evaluation kit includes self-installing software on
a CD. The software is compatible with Windows 2000/NT/XP. If
the setup file does not run automatically, setup.exe can be run
from the CD.
a CD. The software is compatible with Windows 2000/NT/XP. If
the setup file does not run automatically, setup.exe can be run
from the CD.
Install the evaluation software before connecting the evaluation
board to the USB port of the PC to ensure that the evaluation
board is correctly recognized when connected to the PC.
board to the USB port of the PC to ensure that the evaluation
board is correctly recognized when connected to the PC.
1. After the installation from the CD is complete, power up
the AD5754R evaluation board as described in the Power
Supplies section. Then, connect it to the USB port of your
PC using the supplied cable.
Supplies section. Then, connect it to the USB port of your
PC using the supplied cable.
2. When the evaluation board is detected, proceed through
any dialog boxes that appear. This completes the installation.
USING THE SOFTWARE
1. To launch the software, select the AD5754R submenu from
the Analog Devices menu.
2. Click AD5754R Evaluation Software.
Figure 2 displays the main window. This window is divided into
six sections: Input Register, Control Register, Power Control
Register
six sections: Input Register, Control Register, Power Control
Register
, Hardware Configuration, Program output Voltage
and On-Board ADC.
06
53
4-
0
02
Figure 2. Main Window