Atmel Evaluation Board AT32UC3C-EK AT32UC3C-EK Fiche De Données
Codes de produits
AT32UC3C-EK
16
AVR32919
32151A-AVR-09/10
4.3 Networking
The networking block of the AT32UC3C-EK covers all components providing CAN
and LIN bus interfaces through DB9 connectors and 3-pins headers.
and LIN bus interfaces through DB9 connectors and 3-pins headers.
4.3.1 Overview
Figure 4-8. Atmel AT32UC3C-EK Networking Logical View
The networking block supports both CAN and LIN interface:
•
The CAN transceivers are embedded on the UC3C-EK (U9 and U11) and
termination resistors can be used as bus configuration through 2-pin headers (J9
and J14). See 4.1.3.1 section. The physical connections of CAN bus are
accessible through DB9 connectors (J10 and J15).
termination resistors can be used as bus configuration through 2-pin headers (J9
and J14). See 4.1.3.1 section. The physical connections of CAN bus are
accessible through DB9 connectors (J10 and J15).
•
The LIN transceivers are embedded on the UC3C-EK (U10 and U12). The
master/slave configurations are accessible through 2-pin headers (J12 and J17).
The board supports also the capability to be powered-up by LIN bus through 2 pin
headers (J11 and J16). See 4.1.3.1 section. The physical connections of LIN bus
are accessible through 3-pins headers (J13 and J18).
master/slave configurations are accessible through 2-pin headers (J12 and J17).
The board supports also the capability to be powered-up by LIN bus through 2 pin
headers (J11 and J16). See 4.1.3.1 section. The physical connections of LIN bus
are accessible through 3-pins headers (J13 and J18).