Atmel Evaluation Board AT32UC3C-EK AT32UC3C-EK Fiche De Données
Codes de produits
AT32UC3C-EK
28
AVR32919
32151A-AVR-09/10
Table 4-23. UC3C pinout for the hall sensors (J43)
QFP144 pin
GPIO
GPIO alternate function
Feature
66
PB27
QDEC – QEPA
Quadrature Decoder Line A
67
PB28
QDEC – QEPB
Quadrature Decoder Line B
68
PB29
QDEC – QEPI
Quadrature Decoder Line I
-
-
-
GND on J43.5
-
-
-
VCC3 on J43.1
4.6.3 Configuration and Test Points
4.6.3.1 Configuration
The J25.1 and J25.2 pins are configurable through the J44 header. Refer to Table 4-
17, for a description of the possible configurations.
17, for a description of the possible configurations.
4.6.3.2 AVRMC300 Configuration
The XL and XH signals are multiplexed with NEXUS signals. Due to that, 0 ohm
resistors (R160 and R162) are inserted between these signals and I/O signals. There
are not mounted by default. It means NEXUS signals are functional. Just mount these
resistors to activate XL and XH signals.
resistors (R160 and R162) are inserted between these signals and I/O signals. There
are not mounted by default. It means NEXUS signals are functional. Just mount these
resistors to activate XL and XH signals.
The differential measures and comparator detections are multiplexed. Due to that, 0
ohm resistors (R157, R158, R159 and R161) are inserted. As there are mounted by
default, differential measures and comparator detections are accessible.
ohm resistors (R157, R158, R159 and R161) are inserted. As there are mounted by
default, differential measures and comparator detections are accessible.
4.6.3.3 Test Points
None.