Atmel Xplained Evaluation Board AT32UC3L0-XPLD AT32UC3L0-XPLD Fiche De Données
Codes de produits
AT32UC3L0-XPLD
Atmel AVR32924: UC3-L0 XPLAINED Hardware User’s Guide [APPLICATION NOTE]
32156C
−AVR−06/2013
5
Figure 2-2. Functional overview of the Atmel UC3-L0 Xplained kit.
Temperature
Sensor,
PWM Voltage
generation
AT32UC3L064
USB Device
Dataflash
Four standard 10 pin
headers that can be used
with various top cards
Button
LEDs
JTAG
DEBUG
MEMORIES
EXPANSIONS
HI
D
QTouch
button
QMatrix
slider
AT32UC3B1256
USART/TWI
2.1
Preprogrammed Firmware
The Atmel AT32UC3L064 and the Atmel AT32UC3B1256 that come with the Atmel UC3-L0 Xplained kit are both
preprogrammed.
preprogrammed.
The preprogrammed firmware in the AT32UC3L064 is set up with a small demo with the QMatrix touch slider and
QTouch button that can be used to control the RGB LED. The device also features a UART boot loader that can be
used to program new firmware to the device. Hold the mechanical button while applying power to start the boot loader.
The boot loader can be used with the command line tool “batchISP” delivered with FLIP.
QTouch button that can be used to control the RGB LED. The device also features a UART boot loader that can be
used to program new firmware to the device. Hold the mechanical button while applying power to start the boot loader.
The boot loader can be used with the command line tool “batchISP” delivered with FLIP.
The preprogrammed AT32UC3B1256 firmware offers features such as a boot loader for self-programming of the board
controller itself and a UART-to-USB gateway. The bootloader can be started by shorting the 2-pin header (not mounted)
while applying power to the board. The bootloader can be used with the command line tool “BatchISP” delivered with
FLIP.
controller itself and a UART-to-USB gateway. The bootloader can be started by shorting the 2-pin header (not mounted)
while applying power to the board. The bootloader can be used with the command line tool “BatchISP” delivered with
FLIP.