Atmel Xplained Evaluation Board ATXMEGAA3BU-XPLD ATXMEGAA3BU-XPLD Fiche De Données
Codes de produits
ATXMEGAA3BU-XPLD
6
Atmel AVR1935
8324B-AVR-09/11
Figure 4-2. Connecting AVR ONE! to a XMEGA-A3BU Xplained board.
4.4 Atmel AVR JTAGICE mkll
The grey female 10-pin header on JTAGICE mkII has to be used when connecting to
the kit. The opening in the board is made to fit the orientation tab on the header.
the kit. The opening in the board is made to fit the orientation tab on the header.
NOTE
When using PDI with the JTAGICE mkII it is necessary to use the squid cable. Follow
the instructions in the JTAGICE mkII manual and the silkscreen description for the
programming header.
the instructions in the JTAGICE mkII manual and the silkscreen description for the
programming header.
Figure 4-3. Connecting AVR JTAGICE mkll to an XMEGA-A3BU Xplained board.
4.5 Atmel AVR Dragon
®
In order to connect the AVR Dragon to the XMEGA-A3BU Xplained, a 10-pin header
cable is needed. Connect the cable between the JTAG connector on the AVR
Dragon™ kit and the XMEGA-A3BU Xplained JTAG connector. Pin 1 on the XMEGA-
A3BU Xplained kit is marked with a square pad.
cable is needed. Connect the cable between the JTAG connector on the AVR
Dragon™ kit and the XMEGA-A3BU Xplained JTAG connector. Pin 1 on the XMEGA-
A3BU Xplained kit is marked with a square pad.