Atmel Xplained Evaluation Board AT32UC3L0-XPLD AT32UC3L0-XPLD Fiche De Données
Codes de produits
AT32UC3L0-XPLD
107
32099G–06/2011
AT32UC3L016/32/64
11.7
Rev. A – 06/2009
13.
SCIF: Temperature sensor is connected to ADC channel 9, not 7.
14.
SCIF: Updated the oscillator connection figure for OSC0
15.
GPIO: Removed unimplemented features (pull-down, buskeeper, drive strength, slew rate,
Schmidt trigger, open drain).
Schmidt trigger, open drain).
16.
SPI: RDR.PCS field removed (RDR[19:16]).
17.
TWIS: Figures updated.
18.
ADCIFB: The sample and hold time and the startup time formulas have been corrected (ADC
Configuration Register).
Configuration Register).
19.
ADCIFB: Updated ADC signal names.
20.
ACIFB: CONFW.WEVSRC is bit 8-10, CONFW.EWEVEN is bit 11. CONF.EVENP and
CONF.EVENN bits are swapped.
CONF.EVENN bits are swapped.
21.
CAT: Matrix size is 16 by 8, not 18 by 8.
22.
Electrical Characteristics: General update.
23.
Mechanical Characteristics: Added numbers for package drawings.
24.
Mechanical Characteristics: In the TQFP-48 package drawing the Lead Coplanarity is
0.102mm, not 0.080mm.
0.102mm, not 0.080mm.
25.
Ordering Information: Ordering code for TLLGA-48 package updated.
1.
Initial revision.