Atmel ARM-Based Evaluation Kit AT91SAM9N12-EK AT91SAM9N12-EK Fiche De Données
Codes de produits
AT91SAM9N12-EK
Coprocessor Interface
ARM DDI0198D
Copyright © 2001-2003 ARM Limited. All rights reserved.
8-7
8.3.1
Interlocked MCR
If the data for an MCR operation is not available inside the ARM9EJ-S core pipeline
during its first Decode cycle, then the ARM9EJ-S core pipeline interlocks for one or
more cycles until the data is available. An example of this is where the register being
transferred is the destination from a preceding LDR instruction. In this situation the
MCR instruction enters the Decode stage of the coprocessor pipeline, and remains there
for a number of cycles before entering the Execute stage.
during its first Decode cycle, then the ARM9EJ-S core pipeline interlocks for one or
more cycles until the data is available. An example of this is where the register being
transferred is the destination from a preceding LDR instruction. In this situation the
MCR instruction enters the Decode stage of the coprocessor pipeline, and remains there
for a number of cycles before entering the Execute stage.
Figure 8-5 shows an example of an interlocked MCR.
Figure 8-5 Interlocked MCR
MCR/MRC
WAIT
LAST
Ignored
Coproc data
Decode
(interlock)
Execute
(WAIT)
Execute
(LAST)
Memory
Write
CPLATECANCEL
CHSDE[1:0]
CHSEX[1:0]
CPDOUT[31:0]
MCR
CPDIN[31:0]
MRC
CPPASS
CPINSTR[31:0]
nCPMREQ
CLK
Coprocessor pipeline
Decode
WAIT
Fetch