Atmel SAM4S Xplained Pro Starter and Evaluation Kit ATSAM4S-XPRO ATSAM4S-XPRO Fiche De Données

SAM4S Series [DATASHEET]

Atmel-11100G-ATARM-SAM4S-Datasheet_27-May-14

1074

path). Note that the ADC fault output connected to the PWM is not the COMPE bit. Thus the Fault Mode (FMOD) 

within the PWM configuration must be FMOD = 1.

To prevent any single software error from corrupting ADC behavior, certain registers in the address space can be 

write-protected by setting the WPEN bit in the 

If a write access to the protected registers is detected, the WPVS flag in the 

 (ADC_WPSR) is set and the field WPVSRC indicates the register in which the write access has been 

attempted.
The WPVS flag is automatically reset by reading the ADC_WPSR.
The following registers can be write-protected:



















