Atmel SAM4S Xplained Pro Starter and Evaluation Kit ATSAM4S-XPRO ATSAM4S-XPRO Fiche De Données
Codes de produits
ATSAM4S-XPRO
903
SAM4S Series [DATASHEET]
Atmel-11100G-ATARM-SAM4S-Datasheet_27-May-14
38.14.2 HSMCI Mode Register
Name:
HS
MCI_MR
Address:
0x40000004
Access:
Read
/Write
This register can only be written if the WPEN bit is cleared in “HSMCI Write Protection Mode Register” on page 926.
• CLKDIV: Clock Divider
High Speed MultiMedia Card Interface clock (MCCK or HSMCI_CK) is Master Clock (MCK) divided by (2*(CLKDIV+1)).
• PWSDIV: Power Saving Divider
High Speed MultiMedia Card Interface clock is divided by 2
(PWSDIV)
+ 1 when entering Power Saving Mode.
Warning:
This value must be different from 0 before enabling the Power Save Mode in the HSMCI_CR (HSMCI_PWSEN
bit).
• RDPROOF: Read Proof Enable
Enabling Read Proof allows to stop the HSMCI Clock during read access if the internal FIFO is full. This will guarantee data
integrity, not bandwidth.
0: Disables Read Proof.
1: Enables Read Proof.
0: Disables Read Proof.
1: Enables Read Proof.
• WRPROOF: Write Proof Enable
Enabling Write Proof allows to stop the HSMCI Clock during write access if the internal FIFO is full. This will guarantee
data integrity, not bandwidth.
0: Disables Write Proof.
1: Enables Write Proof.
0: Disables Write Proof.
1: Enables Write Proof.
• FBYTE: Force Byte Transfer
Enabling Force Byte Transfer allow byte transfers, so that transfer of blocks with a size different from modulo 4 can be
supported.
Warning:
Warning:
BLKLEN value depends on FBYTE.
0: Disables Force Byte Transfer.
1: Enables Force Byte Transfer.
1: Enables Force Byte Transfer.
31
30
29
28
27
26
25
24
–
–
–
–
–
–
–
–
23
22
21
20
19
18
17
16
–
–
–
–
–
–
–
–
15
14
13
12
11
10
9
8
PDCMODE
PADV
FBYTE
WRPROOF
RDPROOF
PWSDIV
7
6
5
4
3
2
1
0
CLKDIV