Atmel Xplained Pro Evaluation Kit ATSAM4E-XPRO ATSAM4E-XPRO Fiche De Données

Atmel-11157D-ATARM-SAM4E16-SAM4E8-Datasheet_12-Jun-14

The Atmel SAM4E series of Flash microcontrollers is based on the high-
performance 32-bit ARM

®

 Cortex

®

-M4 RISC processor and includes a floating

point unit (FPU). It operates at a maximum speed of 120 MHz and features up to
1024 Kbytes of Flash, 2 Kbytes of cache memory and up to 128 Kbytes of SRAM.

The SAM4E offers a rich set of advanced connectivity peripherals including
10/100 Mbps Ethernet MAC supporting IEEE 1588 and dual CAN. With a single-
precision FPU, advanced analog features, as well as a full set of timing and
control functions, the SAM4E is the ideal solution for industrial automation, home
and building control, machine-to-machine communications, automotive
aftermarket and energy management applications.

The peripheral set includes a full-speed USB device port with embedded
transceiver, a 10/100 Mbps Ethernet MAC supporting IEEE 1588, a high-speed
MCI for SDIO/SD/MMC, an external bus interface featuring a static memory
controller providing connection to SRAM, PSRAM, NOR Flash, LCD Module and
NAND Flash, a parallel I/O capture mode for camera interface, hardware
acceleration for AES256, two USARTs, two UARTs, two TWIs, three SPIs, as well
as a 4-channel PWM, nine general-purpose 16-bit Timers (with stepper motor and
quadrature decoder logic support), one RTC, two Analog Front End interfaces
(16-bit ADC, DAC, MUX and PGA), one 12-bit DAC (2-ch) and an analog
comparator.