Atmel SAM4S-XPLD Atmel ATSAM4S-XPLD ATSAM4S-XPLD Fiche De Données

 857

SAM4S [DATASHEET]

11100E–ATARM–24-Jul-13

The PWM master clock (MCK) is divided in the clock generator module to provide different clocks available for all
channels. Each channel can independently select one of the divided clocks.

The clock generator is divided in three blocks:



a modulo n counter which provides 11 clocks: F

MCK

, F

MCK

/2, F

MCK

/4, F

MCK

/8, F

MCK

/16, F

MCK

/32, F

MCK

/64, 

F

MCK

/128, F

MCK

/256, F

MCK

/512, F

MCK

/1024 



two linear dividers (1, 1/2, 1/3, ... 1/255) that provide two separate clocks: clkA and clkB

Each linear divider can independently divide one of the clocks of the modulo n counter. The selection of the clock to be
divided is made according to the PREA (PREB) field of the PWM Clock register (PWM_CLK). The resulting clock clkA
(clkB) is the clock selected divided by DIVA (DIVB) field value.

After a reset of the PWM controller, DIVA (DIVB) and PREA (PREB) are set to 0. This implies that after reset clkA (clkB)
are turned off.

At reset, all clocks provided by the modulo n counter are turned off except clock ”MCK”. This situation is also true when
the PWM master clock is turned off through the Power Management Controller.

CAUTION:



Before using the PWM macrocell, the programmer must first enable the PWM clock in the Power Management 
Controller (PMC).

modulo n counter

MCK/2
MCK/4

MCK/16
MCK/32
MCK/64

MCK/8

Divider A

clkA

DIVA

PWM_MR

MCK

MCK/128
MCK/256
MCK/512
MCK/1024

PREA

Divider B

clkB

DIVB

PWM_MR

PREB

MCK