Mikroelektronika MIKROE-350 Fiche De Données

221

- SOFTWARE AND HARDWARE SOLUTIONS FOR EMBEDDED WORLD

CHAPTER 6

sub procedure Glcd_Set_Side(dim x_pos as byte)

Nothing.

Selects Glcd side. Refer to the Glcd datasheet for detailed explaination. 

Parameters : 

- 

x_pos:

position on x-axis. Valid values: 0..127 

The parameter 

x_pos

specifies the Glcd side: values from 0 to 63 specify the

left side, values from 64 to 127 specify the right side.

Note: For side, x axis and page layout explanation see schematic at the bottom
of this page.

Glcd needs to be initialized, see Glcd_Init routine.

The following two lines are equivalent, and both of them select the left side of
Glcd:

Glcd_Select_Side(0)
Glcd_Select_Side(10)

sub procedure Glcd_Set_X(dim x_pos as byte)

Nothing.

Sets x-axis position to x_pos dots from the left border of Glcd within the select-
ed side.

Parameters : 

- 

x_pos:

position on x-axis. Valid values: 0..63 

Note: For side, x axis and page layout explanation see schematic at the bottom
of this page.

Glcd needs to be initialized, see Glcd_Init routine.

Glcd_Set_X(25)