Mikroelektronika MIKROE-350 Fiche De Données
SPI_Glcd_Write_Text
401
MIKROELEKTRONIKA
- SOFTWARE AND HARDWARE SOLUTIONS FOR EMBEDDED WORLD
Libraries
mikroBasic PRO for AVR
CHAPTER 6
Prototype
sub procedure SPI_Glcd_Write_Text(dim byref text as string[40],
dim x_pos as byte, dim page_numb as byte, dim color as byte)
dim x_pos as byte, dim page_numb as byte, dim color as byte)
Returns
Nothing.
Description
Prints text on Glcd.
Parameters :
-
text:
text to be written
-
x_pos:
text starting position on x-axis.
-
page_num:
the number of the page on which text will be written. Valid values: 0..7
-
color:
color parameter. Valid values: 0..2
The parameter
color
determines the color of the text: 0 white, 1 black, and 2
inverts each dot.
Note: For x axis and page layout explanation see schematic at the bottom of
this page.
this page.
Requires
Glcd needs to be initialized for SPI communication, see SPI_Glcd_Init routines.
Use the SPI_Glcd_Set_Font to specify the font for display; if no font is speci-
fied, then the default 5x8 font supplied with the library will be used.
fied, then the default 5x8 font supplied with the library will be used.
Example
' Write text "Hello world!" on the position 10 inside the page 2:
SPI_Glcd_Write_Text("Hello world!", 10, 2, 1)
SPI_Glcd_Write_Text("Hello world!", 10, 2, 1)