Mikroelektronika MIKROE-350 Fiche De Données
SPI_T6963C_WriteData
423
MIKROELEKTRONIKA
- SOFTWARE AND HARDWARE SOLUTIONS FOR EMBEDDED WORLD
Libraries
mikroBasic PRO for AVR
CHAPTER 6
Requires
Global variables :
-
SPExpanderCS:
Chip Select line
-
SPExpanderRST:
Reset line
-
SPExpanderCS_Direction:
Direction of the Chip Select pin
-
SPExpanderRST_Direction:
Direction of the Reset pin
must be defined before using this function.
SPI module needs to be initialized. See SPI1_Init and SPI1_Init_Advanced routines.
Example
// port expander pinout definition
dim SPExpanderCS as sbit at PORTB.B1
dim SPExpanderCS as sbit at PORTB.B1
SPExpanderRST
as sbit at PORTB.B0
SPExpanderCS_Direction
as sbit at DDRB.B1
SPExpanderRST_Direction
as sbit at DDRB.B0
...
' Initialize SPI module
SPI1_Init_Advanced(_SPI_MASTER, _SPI_FCY_DIV32,
_SPI_CLK_HI_TRAILING)
_SPI_CLK_HI_TRAILING)
SPI_Rd_Ptr = @SPI1_Read ' Pass pointer to
SPI Read function of used SPI module
SPI_T6963C_Config(240, 64, 8, 0, 0, 1, 3, 4)
SPI Read function of used SPI module
SPI_T6963C_Config(240, 64, 8, 0, 0, 1, 3, 4)
Prototype
sub procedure SPI_T6963C_WriteData(dim Ddata as byte)
Returns
Nothing.
Description
Writes data to T6963C controller via SPI interface.
Parameters :
-
Ddata:
data to be written
Requires
Toshiba Glcd module needs to be initialized. See SPI_T6963C_Config routine.
Example
SPI_T6963C_WriteData(AddrL)