Mikroelektronika MIKROE-350 Fiche De Données

447

- SOFTWARE AND HARDWARE SOLUTIONS FOR EMBEDDED WORLD

CHAPTER 6

sub procedure T6963C_WriteCommand(dim mydata as byte)

Nothing.

Writes command to T6963C controller.

Parameters : 

- 

mydata:

command to be written 

Toshiba Glcd module needs to be initialized. See the T6963C_Init routine.

T6963C_WriteCommand(T6963C_CURSOR_POINTER_SET)

sub procedure T6963C_SetPtr(dim p as word, dim c as byte)

Nothing.

Sets the memory pointer p for command c.

Parameters : 

- 

p:

address where command should be written 

- 

c:

command to be written 

Toshiba Glcd module needs to be initialized. See the T6963C_Init routine.

T6963C_SetPtr(T6963C_grHomeAddr + start,

T6963C_ADDRESS_POINTER_SET)

sub procedure T6963C_WaitReady()

Nothing.

Pools the status byte, and loops until Toshiba Glcd module is ready.

Toshiba Glcd module needs to be initialized. See the T6963C_Init routine.

T6963C_WaitReady()