Mikroelektronika MIKROE-350 Fiche De Données
T6963C_Cursor
T6963C_Cursor_Blink
Library Example
The following drawing demo tests advanced routines of the T6963C Glcd library. Hardware con-
figurations in this example are made for the T6963C 240x128 display, EasyAVR5A board and
ATmega16.
figurations in this example are made for the T6963C 240x128 display, EasyAVR5A board and
ATmega16.
458
MIKROELEKTRONIKA
- SOFTWARE AND HARDWARE SOLUTIONS FOR EMBEDDED WORLD
Libraries
mikroBasic PRO for AVR
CHAPTER 6
Prototype
sub procedure T6963C_Cursor(dim n as byte)
Returns
Nothing.
Description
Set cursor on/off.
Parameters :
-
n:
on/off parameter. Valid values:
0
(set cursor off) and
1
(set cursor on).
Requires
Toshiba Glcd module needs to be initialized. See the T6963C_Init routine.
Example
' set cursor on
T6963C_Cursor(1)
Prototype
sub procedure T6963C_Cursor_Blink(dim n as byte)
Returns
Nothing.
Description
Enable/disable cursor blinking.
Parameters :
-
n:
on/off parameter. Valid values: 0 (disable cursor blinking) and 1 (enable
cursor blinking).
Requires
Toshiba Glcd module needs to be initialized. See the T6963C_Init routine.
Example
' enable cursor blinking
T6963C_Cursor_Blink(1)