Atmel Xplained Pro Evaluation Kit for the ATSAMD21J18A Microcontroller ATSAMD21-XPRO ATSAMD21-XPRO Fiche De Données
Codes de produits
ATSAMD21-XPRO
1010
Atmel | SMART SAM D21 [DATASHEET]
Atmel-42181C–SAM-D21_Datasheet–07/2014
41.3 Rev. A – 02/2014
Updated V
DD
max from 3.63V to 3.63V in
Updated VDDIN pin from 57 to 56 in
.
: Updated Max values for STANDBYfrom 190.6µA and 197.3µA to 100µA in
.
Added
.
: tRISE and tFALL updated with different load conditions depending on the
DVRSTR value in .
: Correct typo IOL and IOH Max values inverted between
PORT.PINCFG.DRVSTR=0 and 1, tRISE and tFALL updated with different load conditions depending on the
DVRSTR value in
DVRSTR value in
: Removed note from
.
: Added Max DC supply current (I
DD
), R
SAMPLE
maximum value
changed from 2.8kW to 3.5kW, Conversion time Typ value change to Min Value in
: Added Max DC supply current (I
DD
) in
: Added Min and Max values for VSCALE INL, DNL, Offset Error
and Gain Error in
: Characteristics": Added Min and Max values,
.
: Add Typical values for t
R
in
Removed Asynchronous Watchdog Clock Characterization.
: Added Max current consumption (I
OSC32K
) in
Updated Crystal Oscillator Characteristics (XOSC32K) ESR maximum values,
Updated Crystal Oscillator Characteristics (XOSC) ESR maximum value,
from 348k
Ω to 141kΩ.
: Updated presentation, now separating
between Open- and Closed Loop Modes. Added f
REF
Min and Max values to
.
Updated typical Startup time ( t
STARTUP
) from 6.1µs to 8µs in
.
Updated typical Fine lock time (t
LFINE
: Added Current consumption
(I
FDPLL96M
), Period Jitter (Jp), Lock time (t
LOCK
), Duty cycles parameters in
.
Added
: Added SCK period (t
SCK
) Typ value in
.
Errata
Errata for revision B added.
Initial revision