Linear Technology LTM4600HV Demo Board, 28V, 10A Step-Down Power µModule Regulator DC823B-B DC823B-B Fiche De Données
Codes de produits
DC823B-B
LTM4600HV
1
4600hvfc
, LTC, LT and LTM are registered trademarks of Linear Technology Corporation.
μModule is a trademark of Linear Technology Corporation. All other trademarks are the
property of their respective owners.
property of their respective owners.
LOAD CURRENT (A)
0
EFFICIENCY (%)
6
4600HV TA01b
2
4
8
10
80
90
100
70
60
50
40
30
1.8V
OUT
2.5V
OUT
3.3V
OUT
5V
OUT
10A, 28V
IN
High Effi ciency
DC/DC µModule
The LTM
®
4600HV is a complete 10A, DC/DC step down
power supply with up to 28V input operation. Included
in the package are the switching controller, power FETs,
inductor, and all support components. Operating over
an input voltage range of 4.5V to 28V, the LTM4600HV
supports an output voltage range of 0.6V to 5V, set by a
single resistor. This high effi ciency design delivers 10A
continuous current (12A peak), needing no heat sinks or
airfl ow to meet power specifi cations. Only bulk input and
output capacitors are needed to fi nish the design.
in the package are the switching controller, power FETs,
inductor, and all support components. Operating over
an input voltage range of 4.5V to 28V, the LTM4600HV
supports an output voltage range of 0.6V to 5V, set by a
single resistor. This high effi ciency design delivers 10A
continuous current (12A peak), needing no heat sinks or
airfl ow to meet power specifi cations. Only bulk input and
output capacitors are needed to fi nish the design.
The low profi le package (2.8mm) enables utilization of
unused space on the bottom of PC boards for high density
point of load regulation. High switching frequency and an
adaptive on-time current mode architecture enables a very
fast transient response to line and load changes without
sacrifi cing stability. Fault protection features include
integrated overvoltage and short circuit protection with
a defeatable shutdown timer. A built-in soft-start timer is
adjustable with a small capacitor.
unused space on the bottom of PC boards for high density
point of load regulation. High switching frequency and an
adaptive on-time current mode architecture enables a very
fast transient response to line and load changes without
sacrifi cing stability. Fault protection features include
integrated overvoltage and short circuit protection with
a defeatable shutdown timer. A built-in soft-start timer is
adjustable with a small capacitor.
The LTM4600HV is packaged in a thermally enhanced,
compact (15mm × 15mm) and low profi le (2.8mm) over-
molded Land Grid Array (LGA) package suitable for auto-
mated assembly by standard surface mount equipment.
The LTM4600HV is Pb-free and RoHS compliant.
compact (15mm × 15mm) and low profi le (2.8mm) over-
molded Land Grid Array (LGA) package suitable for auto-
mated assembly by standard surface mount equipment.
The LTM4600HV is Pb-free and RoHS compliant.
■
Telecom and Networking Equipment
■
Military and Avionics Systems
■
Industrial Equipment
■
Point of Load Regulation
■
Servers
■
Complete Switch Mode Power Supply
■
Wide Input Voltage Range: 4.5V to 28V
■
10A DC, 12A Peak Output Current
■
Parallel Two μModule™ DC/DC Converters for 20A
Output Current
■
0.6V to 5V Output Voltage
■
1.5% Output Voltage Regulation
■
Ultrafast Transient Response
■
Current Mode Control
■
–55°C to 125°C Operating Temperature Range
(LTM4600HVMPV)
■
Pb-Free (e4) RoHS Compliant Package Gold-Pad
Finish
■
Up to 92% Effi ciency
■
Programmable Soft-Start
■
Output Overvoltage Protection
■
Optional Short-Circuit Shutdown Timer
■
Small Footprint, Low Profi le (15mm × 15mm ×
2.8mm) LGA Package
10A μModule Power Supply with 4.5V to 28V Input
APPLICATIO S
U
FEATURES
DESCRIPTIO
U
TYPICAL APPLICATIO
U
Effi ciency vs Load Current with 24V
IN
(FCB = 0)
V
IN
C
IN
4600hv TA01a
LTM4600HV
PGND
SGND
V
OUT
V
OSET
V
IN
4.5V TO 28V
ABSMAX
V
OUT
2.5V*
10A
10A
C
OUT
31.6k
*REVIEW DE-RATING CURVE AT
THE HIGHER INPUT VOLTAGE
THE HIGHER INPUT VOLTAGE