Mikroelektronika MikroE Development Kits MIKROE-1105 Fiche De Données

This is information on a product in full production. 

June 2013

DocID022152 Rev 4

1/185

1

ARM Cortex-M4 32b MCU+FPU, 210DMIPS, up to 1MB Flash/192+4KB RAM, USB

OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 comm. interfaces & camera

-

• Core: ARM 32-bit Cortex™-M4 CPU with FPU, 

Adaptive real-time accelerator (ART 

Accelerator™) allowing 0-wait state execution 

from Flash memory, frequency up to 168 MHz, 

memory protection unit, 210 DMIPS/

1.25 DMIPS/MHz

 

(Dhrystone 2.1), and DSP 

instructions

• Memories

– Up to 1 Mbyte of Flash memory
– Up to 192+4 Kbytes of SRAM including 64-

Kbyte of CCM (core coupled memory) data 

RAM

– Flexible static memory controller 

supporting Compact Flash, SRAM, 

PSRAM, NOR and NAND memories

• LCD parallel interface, 8080/6800 modes
• Clock, reset and supply management

– 1.8 V to 3.6 V application supply and I/Os
– POR, PDR, PVD and BOR
– 4-to-26 MHz crystal oscillator
– Internal 16 MHz factory-trimmed RC (1% 

accuracy)

– 32 kHz oscillator for RTC with calibration
– Internal 32 kHz RC with calibration

•

Low power

– Sleep, Stop and Standby modes
– V

BAT

 supply for RTC, 20×32 bit backup 

registers + optional 4 KB backup SRAM

• 3×12-bit, 2.4 MSPS A/D converters: up to 24 

channels and 7.2 MSPS in triple interleaved 

mode

• 2×12-bit D/A converters
• General-purpose DMA: 16-stream DMA 

controller with FIFOs and burst support

• Up to 17 timers: up to twelve 16-bit and two 32-

bit timers up to 168 MHz, each with up to 4 

IC/OC/PWM or pulse counter and quadrature 

(incremental) encoder input

• Debug mode

– Serial wire debug (SWD) & JTAG 

interfaces

– Cortex-M4 Embedded Trace Macrocell™

• Up to 140 I/O ports with interrupt capability

– Up to 136 fast I/Os up to 84 MHz
– Up to 138 5 V-tolerant I/Os

• Up to 15 communication interfaces

– Up to 3 × I

2

C interfaces (SMBus/PMBus)

– Up to 4 USARTs/2 UARTs (10.5 Mbit/s, ISO 

7816 interface, LIN, IrDA, modem control)

– Up to 3 SPIs (42 Mbits/s), 2 with muxed 

full-duplex I

2

S to achieve

 

audio class 

accuracy via internal audio PLL or external 

clock

– 2 × CAN interfaces (2.0B Active)
– SDIO interface

• Advanced connectivity

– USB 2.0 full-speed device/host/OTG 

controller with on-chip PHY

– USB 2.0 high-speed/full-speed 

device/host/OTG controller with dedicated 

DMA, on-chip full-speed PHY and ULPI

– 10/100 Ethernet MAC with dedicated DMA: 

supports IEEE 1588v2 hardware, MII/RMII

• 8- to 14-bit parallel camera interface up to 

54 Mbytes/s

• True random number generator
• CRC calculation unit
• 96-bit unique ID
• RTC: subsecond accuracy, hardware calendar

         

LQFP64 (10 × 10 mm)

LQFP100 (14 × 14 mm)
LQFP144 (20 × 20 mm)

FBGA

UFBGA176 

(10 × 10 mm)

LQFP176 (24 × 24 mm)

WLCSP90

STM32F405xx

STM32F405RG, STM32F405VG, STM32F405ZG, 
STM32F405OG, STM32F405OE

STM32F407xx

STM32F407VG, STM32F407IG, STM32F407ZG,
STM32F407VE, STM32F407ZE, STM32F407IE