STMicroelectronics Low cost Li-Ion battery charger demonstration board based on the ST7260 and L6924U STEVAL-ISB007V1 STEVAL-ISB007V1 Fiche De Données
Codes de produits
STEVAL-ISB007V1
Data Brief
For further information contact your local STMicroelectronics sales office.
February 2009
Rev 1
1/6
6
STEVAL-ISB007V1
Low cost Li-Ion battery charger demonstration board
based on the ST7260 and L6924U
Features
■
Can be used in USB mode or adapter mode
■
LEDs indicate status of charging conditions
■
ICC connector available to program the
microcontroller
microcontroller
■
Li-Ion / Li-Polymer battery charger
Description
The STEVAL-ISB007V1 demonstration board is
based on the L6924, a standalone Li-Ion/ Li-
Polymer battery charger. Power to the board can
be supplied either by USB or an external DC
adaptor.
based on the L6924, a standalone Li-Ion/ Li-
Polymer battery charger. Power to the board can
be supplied either by USB or an external DC
adaptor.
In USB mode, the charging current of the battery
complies with high-power USB device
specifications. The L6924 is powered by 5 V from
the USB, thus also charging the battery.
complies with high-power USB device
specifications. The L6924 is powered by 5 V from
the USB, thus also charging the battery.
An ST7260 microcontroller is used for
enumeration with the PC, to control the SD pin
and to ensure compliance with USB high-power
bus-powered specifications.
enumeration with the PC, to control the SD pin
and to ensure compliance with USB high-power
bus-powered specifications.
The board also features a general-purpose
adaptor socket for use when the board is powered
by an external DC supply. In this case the L6924
is completely independent of the microcontroller.
adaptor socket for use when the board is powered
by an external DC supply. In this case the L6924
is completely independent of the microcontroller.
STEVAL-ISB007V1
Obsolete Product(s) - Obsolete Product(s)