Native Instruments Traktor Kontrol S4 MK2 22400 Fiche De Données

For the FX Unit assignment, press the left or right button to assign this channel to the FX Unit 1
or  2,  respectively.  The  button  lights  up  when  the  channel  is  routed  to  the  corresponding  FX
Unit. When activating both buttons on the same channel, FX Unit 1 and FX Unit 2 will process
the channel’s signal in series.

.

You can activate two additional FX Units in the Preferences of TRAKTOR. Using four FX Units
instead of two implies a few changes in the FX routing scheme. Please refer to section 

 for more info.

For the crossfader assignment, press 

SHIFT

 when using the buttons. This allows you to choose

the  crossfader’s  side  to  which  the  current  channel  is  assigned  (and  thus,  its  corresponding
Deck too):

►

Press 

SHIFT

 + FX Assign 1 or 2 to assign the channel to the left or right side of the

crossfader, respectively.

The resulting assignment is shown by the Crossfader Assignment indicator (the little arrows), at
the bottom of each channel (see description at the end of this section).

You can also unlink a channel from the crossfader by pressing SHIFT and the FX Assign
button corresponding to the side it is currently assigned to. This way, that channel won’t be
affected by the crossfader position.

The EQ and FILTER knobs.

The Mixer

 

Traktor Kontrol S4 - Manual - 135