Native Instruments Traktor Kontrol S4 MK2 22400 Fiche De Données
![Native Instruments](https://files.manualsbrain.com/attachments/61b475555f40abb81081e276e50daaf58aca01dd/common/fit/150/50/f2c90734a1eed7fc609b95497055dd55288ad61dfab5dbca41906fef3ac3/brand_logo.gif)
Codes de produits
22400
Control element
Function
DECK C or DECK D indicator
Lit when your S4 Deck is focused on the lower Deck (Deck C or Deck D).
KEYLOCK
indicator
Lit when Keylock is active.
MASTER
indicator
Lit when the Deck is the tempo master.
Loop Size Display
Shows the loop size selected via the Loop
SIZE
encoder.
TEMPO
fader
Increases/decreases Deck tempo.
Hold
SHIFT
to move the fader without altering the tempo.
Tempo Offset buttons up/down
(OFFSET)
Lit button indicates offset between tempo fader in the software and
TEMPO
fader on the S4. Pressing either button resets the tempo to the
TEMPO
fad-
er position.
Press both buttons simultaneously to lock the tempo to 0 % (the
TEMPO
fader is then disabled). Both buttons light up to indicate the tempo locking.
Press either button to unlock the tempo.
Press either button to unlock the tempo.
Both buttons light up dimmed when the
TEMPO
fader is near 0 %.
LOOP IN
button
Sets a Floating Cue Point at current playback position without stopping the
playback. This Floating Cue Point will serve as Loop In Point when you press
the
playback. This Floating Cue Point will serve as Loop In Point when you press
the
LOOP OUT
button (see below).
Lights up together with
LOOP OUT
when playback is within an active Loop.
In Loop: Hold to adjust Loop In Point with jog wheel.
LOOP OUT
button
Sets a Loop Out Point at current playback position and activates a Floating
Loop between the previously set Floating Cue Point and this Loop Out Point.
Loop between the previously set Floating Cue Point and this Loop Out Point.
Looping active: Lights up together with
LOOP IN
when playback is within
the active Loop, lights up alone when playback is outside the active Loop.
In Loop: Hold to adjust Loop Out Point with jog wheel.
Loop
MOVE
encoder
Push: activates/deactivates looping.
Loop active: Loop move controls. Turn to move the Loop by the selected
loop size (as displayed in the Loop Size Display).
loop size (as displayed in the Loop Size Display).
SHIFT
+ turn to move the
Loop by 1-beat steps.
No Loop active: Beatjump controls. Turn to jump by the selected loop size
(as displayed in the Loop Size Display).
(as displayed in the Loop Size Display).
SHIFT
+ Turn to jump by 1-beat
steps.
Appendix C – Quick References
Track Deck Quick Reference
Traktor Kontrol S4 - Manual - 210