Native Instruments Traktor Kontrol S4 MK2 22400 Fiche De Données
Codes de produits
22400
►
Press the
SIZE
button on the S4 repeatedly to cycle through loop record sizes (in bars).
You can see the current loop size in the software at the top of the Loop Recorder. For our ex-
ample, we’ll choose a loop of 4 bars:
ample, we’ll choose a loop of 4 bars:
The selected loop size is displayed in the software.
Starting the Recording
Now do the following:
1.
1.
Cut the low and mid frequencies on channel B by turning the
LOW
and
MID
knobs fully
counterclockwise.
2.
Turn the
DRY/WET
knob of the Loop Recorder fully clockwise.
3.
When you’re ready, press the
REC
button.
→ The Loop Recorder will punch in (
REC
button lit), automatically punch out according to
the selected loop size (
REC
button back off), and then begin playing (
PLAY
button lit).
That’s all there is to it!
You can hear that our adjustments to the EQ are now part of the recording.
You’ll notice that the loop automatically started playing when it finished recording. If you
don’t want this to happen, just push the PLAY button during recording. Now the loop will
only trigger when you explicitly tell it to.
don’t want this to happen, just push the PLAY button during recording. Now the loop will
only trigger when you explicitly tell it to.
Playing with the Recorded Loop
You can control the balance between the looped recording and the main output using the Loop
Recorder’s
Recorder’s
DRY/WET
knob:
Tutorials
Using the Loop Recorder
Traktor Kontrol S4 - Manual - 63