Native Instruments Traktor Kontrol S4 MK2 22400 Fiche De Données

Codes de produits

22400

Click the play button on both Decks to begin playback.

Turn the

CUE MIX

knob to the center position.

Set the headphone volume to a comfortable level by adjusting the

CUE VOL

knob.

With the channel faders up, move the crossfader back and forth to hear one track, then
the other.

Move the crossfader all the way to channel A so that you are only hearing the track on
Deck A. At the same time bring the channel volume fader all the way down for channel B.

Press the Cue button

below the

CUE MIX

knob.

The button lights up, indicating that Deck B is now sent to the Cue channel, which you
now hear in the headphones. Note that now, no matter where you move the crossfader,
you will still hear Deck B, because its cue is on.

Press Cue button

again to toggle it off and press Cue button

You will now hear the track playing on Deck A, no matter what position the crossfader is
in. This is due to the fact that Deck A's Cue button is on, and the

CUE MIX

knob is still in

the center position.

Press both Cue buttons

and

so that they are both active (illuminated).

10. Turn the

CUE MIX

knob all the way to the left.

11. Now toggle the two Cue buttons on and off. Notice that when both Cue buttons are off

(unilluminated), there is no signal at all coming through the headphones.

12. Press both Cue buttons so that they are off.
13. Turn the

CUE MIX

knob all the way to the right. If the channel faders are up you will be

able to hear the main mix coming through your headphones.

Notice that when both channel faders are down, there is no signal at all coming through

the headphones.

14. Move the crossfader from one side to the other to hear the main mix in the headphone

cue.

Remember that no matter what mix you are hearing in your headphones, the main mix is
still controlled by the crossfader and channel faders.

Using the S4 with TRAKTOR DJ

Key S4 Functions Using TRAKTOR DJ

Traktor Kontrol S4 - Manual - 80