German RepRap 100310 Fiche De Données
NEO 3D-Printer Quick guide
Seite:
13/30
Stand:
2014/06/07 23:06
© German RepRap GmbH
13/30
On the picture on the right you can see the inserted filament. You have to push the extruder on the
lower end while inserting the filament.
lower end while inserting the filament.
(Hint: The filament can be inserted more easy, if you bend it straight)
Always leave the filament in the extruder after finishing the printing. This prevents the tubing and
nozzle from getting clogged, e.g. from dust.
nozzle from getting clogged, e.g. from dust.
First prints
For the first prints you can use the files on the CD-ROM that was shipped with the printer. The CAD
files need to conversion into G-code first. The G-code then contains information specifically tailored
for the NEO. Other files with a file name ending in “.gcode” have already been converted for the NEO.
They will not work on other 3D printers.
files need to conversion into G-code first. The G-code then contains information specifically tailored
for the NEO. Other files with a file name ending in “.gcode” have already been converted for the NEO.
They will not work on other 3D printers.